9499 8753

Call us

184 Grange Rd

Alphington VIC 3078

Wood Coatings 5L

An Acid catalysed, twin pack, high solids, compliant range of lacquers, formulated to provide very high standards of resistance and surface abrasion on most interior wood surfaces. Exhibiting excellent flow and high build qualities, Fiddes A/C Lacquers should be applied in areas where durability and quality of finish are the main requirements.


KEY PRODUCT BENEFITS Excellent durability
High build
Self levelling
Good flow on application
Severe use rating
A/C MATT Sheen: 10% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins
A/C SEMI MATT Sheen: 20% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins
A/C SATIN Sheen: 50% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins
A/C SEMI GLOSS Sheen: 60% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins
A/C GLOSS Sheen: N/A Viscosity: 40/55 Secs Re-Coat: 60/90 Mins
PREPARATION Sand the wooden substrate in stages, working with a medium sandpaper 120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.

APPLICATION Formulated for spray application through conventional, airless or HVLP systems.

Add 10/15% Fiddes A/C Thinners if required.

Always add the Catalyst at a ratio of 10:1 before thinning.

It is important that the correct ratio is used at all times.

Maximum Pot Life once mixed remains 48 hours.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.

ACID CATALYST RATIO 10:1 by volume
THINNER A/C Thinners
RE-COAT 60 – 90 mins
TOUCH DRY 20 mins
COVERAGE 8sq. metres per litre approx
AIR PRESSURE 45-60 psi
FINISHES Gloss- 90%, Satin – 45%, Matt – 20%
Categories ,


There are no reviews yet.

Be the first to review “Wood Coatings 5L”

Your email address will not be published. Required fields are marked *